Products
BIOS IoT modules: LAN Ethernet input and output modules, a Modbus GSM/LTE gateway, an ANDON push-button station and a welding machine run sensor.
LAN Ethernet I/O modules 3Gateways 1Push-button stations and sensors 2
LAN Ethernet I/O modules
8 isolated digital inputs
BIOS-IO-01
Read digital signals from machines, equipment and controllers over the LAN – no programming, configured in a web browser, with data in JSON format.
- 8 isolated digital inputs
- Pulse counters up to 3 kHz on every input
- 35 mm DIN rail, 12–36 VDC supply from terminals or Passive PoE via RJ45
4 digital inputs + 4 relay outputs
BIOS-IO-02
Read digital signals and control signalling or simple actuators/output/control devices over the LAN – in a single module, with no programming.
- 4 isolated digital inputs
- 4 NO relay outputs, max. 2 A
- Ethernet 10/100 Mbit, HTTP JSON
8 relay outputs
BIOS-IO-03
Control signal lights and simple actuators/output/control devices over the LAN – no programming, configured in a web browser.
- 8 NO relay outputs, max. 2 A
- 2 built-in 24 V / 40 mA outputs (AUX1, AUX2)
- Ethernet 10/100 Mbit, HTTP JSON
Gateways
Modbus GSM/LTE gateway
BIOS-GSM-01
Collect data from Modbus RTU devices where there is no LAN and send it over the mobile network to the Microsoft Azure cloud.
- Modbus RTU master (RS485)
- LTE Cat4 / 3G / 2G modem
- MQTT (SSL) to Microsoft Azure IoT Hub
Push-button stations and sensors
ANDON push buttons on the LAN
BIOS-UX-02
The operator raises a request from the shop floor with a single press, and the call reaches the server over the LAN.
- 4 illuminated ANDON push buttons, Ø44 mm
- Remote control of the button lights
- IP65 enclosure, 12–36 VDC supply or Passive PoE
Welder operation sensor
BIOS-CT-01
A module plugged in between the power socket and the welder's plug recognises from the current draw when the welder is actually working.
- Non-invasive measurement
- Plug & play, no electrician needed
- 4 detection thresholds selected with DIP switches